View FSA66M5X_9070596.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

to learn more about on semiconductor, please visit our website at www.onsemi.com please note: as part of the fairchild semiconductor integration, some of the fairchild orderable part numbers will need to change in order to meet on semiconductors system requirements. since the on semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the fairchild part numbers will be changed to a dash (-). this document may contain device numbers with an underscore (_). please check the on semiconductor website to verify the updated device numbers. the most current and up-to-date ordering information can be found at www.onsemi.com . please email any questions regarding the system integration to fairchild_questions@onsemi.com . is now part of on semiconductor and the on semiconductor logo are trademarks of semico nductor components industries, llc dba on semiconductor or its subsid iaries in the united states and/or other countries. on semiconductor ow ns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellec tual property. a listing of on semiconductor?s product/patent cover age may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf . on semiconductor reserves the right to make changes without further notice to any products herein. on semicon ductor makes no warranty, representation or guarantee regarding the s uitability of its products for any particular purpose, nor does on semico nductor assume any liability arising out of the application or use of any product or circuit, and speci?ca lly disclaims any and all liability, including without limitation spe cial, consequential or incidental damages. buyer is responsible for i ts products and applications using on semiconductor products, including compliance with all laws, regul ations and safety requirements or standards, regardless of any suppor t or applications information provided by on semiconductor. ?typica l? parameters which may be provided in on semiconductor data sheets and/or speci?cations can and do vary in diffe rent applications and actual performance may vary over time. all operat ing parameters, including ?typicals? must be validated for each custo mer application by customer?s technical experts. on semiconductor does not convey any license und er its patent rights nor the rights of others. on semiconductor products a re not designed, intended, or authorized for use as a critical compone nt in life support systems or any fda class 3 medical devices or medical devices with a same or similar classi?ca tion in a foreign jurisdiction or any devices intended for implantation i n the human body. should buyer purchase or use on semiconductor products fo r any such unintended or unauthorized application, buyer shall indemnify and hold on semico nductor and its of?cers, employees, subsidiaries, af?liates, and di stributors harmless against all claims, costs, damages, and expense s, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associa ted with such unintended or unauthorized use, even if such claim alleges th at on semiconductor was negligent regarding the design or manufacture o f the part. on semiconductor is an equal opportunity/af?rmative action employer. this literatu re is subject to all applicable copyright laws and is not for resale in any manne r.
june 2006 fsa66 low-voltage uhs single s pst normally open analog switch ?2006 fairchild semiconductor corporation 1 www.fairchildsemi.com fsa66 rev. 1.0.1 fsa66 low-voltage uhs single spst normally open analog switch features space-saving sot23 or sc70 5-lead package ultra small micropak? leadless package broad v cc operating range: 1.65vC5.5v rail-to-rail signal handling 5 switch connection between two ports minimal propagation delay through the switch low i cc zero bounce in flow-through mode control input compatible with cmos input levels >250 mhz C3db bandwidth general description the fsa66 is a ultra high-speed (uhs) cmos compati- ble single-pole/single-throw (spst) analog switch. the low on resistance (r on ) of the switch allows input to be connected to output with mini mal propagation delay and without generating additional ground bounce noise. the device is organized as a 1-bi t switch with a switch enable (oe) signal. when oe is high, the switch is on and port a is connected to port b. when oe is low, the switch is open and a high-impedance state exists between the two ports. ordering information order number package number pb-free product code top mark package description packing method FSA66M5X ma05b yes 7z66 5- lead sot23, jedec mo-178, 1.6mm 3k units on tape and reel fsa66p5x maa05a yes z66 5-lead sc70, eiaj sc-88a, 1.25mm wide 3k units on tape and reel fsa66l6x mac06 yes ee 6-lead micropak, 1.0mm wide 5k units on tape and reel micropak ? is a trademark of fairchild semiconductor corporation.
?2006 fairchild semiconductor corporation 2 www . fairchildsemi . com fsa66 low-voltage uhs single s pst normally open analog switch fsa66 rev. 1.0.1 analog symbolpin descriptions function table connection diagrams pin names function oe switch enable input ab u s a i / o bb u s b i / o nc no connect oe b 0 function l high-z state disconnect ha 0 connect ab gnd v cc oe 1 ab gnd pin assignments for sc70 pin assignments for micropak (top view) (top through view) ab gnd 12 3 v cc ncoe v cc oe 65 4 2 3 5 4
?2006 fairchild semiconductor corporation 3 www.fairchildsemi.com fsa66 low-voltage uhs single s pst normally open analog switch fsa66 rev. 1.0.1 absolute maximum ratings the absolute maximum ratings are those values beyon d which the safety of t he device cannot be guaranteed. the device should not be operated at these limits. the parame tric values defined in the electrical characteristics tables are not guaranteed at the absolute maximum ratings . the recommended operating conditions table defines the conditions for actual device operation. recommended oper ating conditions (2) notes: 1. the input and output negative voltage ratings may be exceeded if the input and output diode curr ent ratings are observed. 2. unused inputs must be held high or low. they may not float. symbol parameter rating v cc supply voltage C0.5v to +7.0v v s dc switch voltage C0.5v to v cc +0.5v v in dc input voltage (1) C0.5v to +7.0v i ik dc input diode current, v in < 0v C50ma i out dc output sink current 128ma i cc /i gnd dc v cc /gnd current 100ma t stg storage temperature range C65c to +150c t j junction lead temperature under bias +150c t l junction lead temperature (soldering, 10 seconds) +260c p d power dissipation @ 85c sot23-5 200mw sc70-5 150mw symbol parameter rating v cc power supply operating 1.65v to 5.5v v in control input voltage 0v to 5.5v v in switch input voltage 0v to v cc v out switch output voltage 0v to v cc t r , t f input rise and fall time control input; v cc = 2.3v to 3.6v 0ns/v to 10ns control input; v cc = 4.5v to 5.5v 0ns/v to 5ns switch i/o 0ns/v to dc t a operating temperature ? 40 c to + 85 c ja thermal resistance sot23-5 300c/w sc70-5 425c/w
?2006 fairchild semiconductor corporation 4 www.fairchildsemi.com fsa66 low-voltage uhs single s pst normally open analog switch fsa66 rev. 1.0.1 dc electrical characteristics notes: 3. measured by the voltage drop between a and b pins at the indicated current through t he switch. on resistance is determined by the lower of the voltages on the two (a or b) pins. 4. all typical values are at the specified v cc , and t a = 25c. 5. parameter is characterized, but not tested in production. 6. flatness is defined as the difference between the maximum and minimum value of on resistance over the specified range of conditions. symbol parameter conditions v cc (v) t a =25c t a = - 40c to + 85c units min. typ. max. min. typ. (4) max. v ih high-level input voltage 1.65 to 1.95 CCC 0 . 7 5 v cc CCv 2.3 to 5.5 C C C 0.7 v cc CC v il low-level input voltage 1.65 to 1.95 CCC C C 0 . 2 5 v cc v 2.3 to 5.5 C C C C C 0.3 v cc i in control input leakage cur- rent 0 v in 5.5v 0 to 5.5 C C C C 0.05 1.0 a i off off leakage current 0 a, b v cc 1.65 to 5.5 C C C C 0.05 10.0 a r on switch on resistance (3) v in = 0v, i in = 30ma 4.5 C C C C 3 7 v in = 2.4v, i in = 15ma C C C C 5 12 v in = 4.5v, i in = 30ma C C C C 7 15 v in = 0v, i in = 24ma 3.0 C C C C 4 9 v in = 3v, i in = 24ma C C C C 10 20 v in = 0v, i in = 8ma 2.3 C C C C 5 12 v in = 2.3v, i in = 8ma C C C C 13 30 v in = 0v, i in = 4ma 1.8 C C C C 7 28 v in = 1.8v, i in = 4ma C C C C 25 60 r flat on resistance flatness (3)(5)(6) i a = C30ma, 0 v bn v cc 5.0 C 6 C C C C i a = C24ma, 0 v bn v cc 3.3 C 12 C C C C i a = C8ma, 0 v b v cc 2.5 C 28 C C C C i a = C4ma, 0 v bn v cc 1.8 C 125 C C C C i cc quiescent supply current v in = v cc or gnd i out = 0v 1.65 to 5.5 C C C C 0.05 10 a
?2006 fairchild semiconductor corporation 5 www.fairchildsemi.com fsa66 low-voltage uhs single s pst normally open analog switch fsa66 rev. 1.0.1 ac electrical characteristics all typical values are @ 25 c unless otherwise specified. capacitance notes: 7. all typical values are at the specified v cc and t a = 25c. 8. this parameter is guaranteed by design, but is not test ed. the switch contributes no propagation delay other than the rc delay of the typical on resistance of the switch and the 50 pf load capacitance when driven by an ideal voltage source (zero output impedance). 9. guaranteed by design. 10.off isolation = 20 log 10 [v a /v bn ]. symbol parameter conditions v cc (v) t a = -40c to + 85 c, c l = 50pf, ru = rd = 500 units figure number min. typ. (7) max. tphl, tplh propagation delay bus to bus (8) v in = open 1.65 to 1.95 C C 4.3 ns figure 1 figure 2 2.3 to 2.7 C C 1.2 3.0 to 3.6 C C 0.8 4.5 to 5.5 C C 0.3 t pzl , t pzh output enable time v in = 2 x v cc for t pzl v in = 0v for t pzh 1.65 to 1.95 1.5 7.0 14.2 ns figure 1 figure 2 2.3 to 2.7 1.5 3.3 7.0 3.0 to 3.6 1.5 2.4 5.5 4.5 to 5.5 1.5 2.0 4.5 t plz , t phz output disable time v in = 2 x v cc for t plz v in = 0v for t phz 1.65 to 1.95 1.5 9.2 18.2 ns figure 1 figure 2 2.3 to 2.7 1.5 5.3 9.0 3.0 to 3.6 1.5 4.0 7.0 4.5 to 5.5 1.5 2.7 5.0 q charge injection (9) c l = 0.1nf, v gen = 0v, r gen = 0 , f = 1mhz 1.65 to 5.5 0.05 pc figure 3 oirr off isolation (10) r l =50 , c l = 5pf, f = 10mhz 1.65 to 5.5 C50 db figure 4 bw -3db bandwidth r l = 50 1.65 to 5.5 >250 mhz figure 5 thd total harmonic distortion (7) r l = 600 , 0.5v p-p , f = 600hz to 20khz 5. 0 1 1% symbol parameter conditions min. typ. max. units c in control pin input capacitance v cc = 0v C 2 C pf c i/o input/output capacitance v cc = 5.0v C 6 C pf
?2006 fairchild semiconductor corporation 6 www.fairchildsemi.com fsa66 low-voltage uhs single s pst normally open analog switch fsa66 rev. 1.0.1 ac loading and waveforms figure 1. ac test circuit figure 2. ac waveforms figure 3. charge injection test switch input enable input switchoutput viru rd cl oe ab input driven by 50 source terminated in 50 . c l includes load and stray capacitance. input prr = 1.0mhz; t w = 500ns. switch input enable input output output v cc 90% 90% 90% 90% 50% 50% 50% 50% 50% 50% 50% 50% 10% 10% 10% 10% gnd gnd v cc v tri v tri v ol +0.3v v ol ?0.3v v oh v oh t plh t phl t pzh t r = 2.5 ns t r = 2.5 ns t f = 2.5 ns t f = 2.5 ns t pzl t plz t phz t w v ol v ol output logic input logic input v gen v out off off on r gen r l 1m 0.1nf c l v out ? v out q=( ? v out )(c l ) b n se1 a
?2006 fairchild semiconductor corporation 7 www.fairchildsemi.com fsa66 low-voltage uhs single s pst normally open analog switch fsa66 rev. 1.0.1 ac loading and waveforms (continued) figure 4. off isolation figure 5. bandwidth 50 50 logic input = v cc v cc gnd 10nf se analyzer ab 50 logic input = v cc v cc gnd signal generator 0dbm 10nf se a b
?2006 fairchild semiconductor corporation 8 www.fairchildsemi.com fsa66 low-voltage uhs single s pst normally open analog switch fsa66 rev. 1.0.1 tape specification tape format for sot23, sc70 tape dimensions dimensions are in millimeters (inc hes) unless othe rwise specified. package designator tape section cavity number cavity status cover tape status m5x, p5x leader (start end) 125 (typ) empty sealed carrier 3000 filled sealed trailer (hub end) 75 (typ) empty sealed package tape size dim a dim b dim f dim k o dim p1 dim w sc70-5 8 mm 0.093 (2.35) 0.096 (2.45) 0.138 0.004 (3.5 0.10) 0.053 0.004 (1.35 0.10) 0.157 (4) 0.315 0.004 (8 0.1) sot23-5 8 mm 0.130 (3.3) 0.130 (3.3) 0.138 0.002 (3.5 0.05) 0.055 0.004 (1.4 0.11) 0.157 (4) 0.315 0.012 (8 0.3)
?2006 fairchild semiconductor corporation 9 www.fairchildsemi.com fsa66 low-voltage uhs single s pst normally open analog switch fsa66 rev. 1.0.1 tape specification (continued) tape format tape dimensions dimensions are in millimeters (inc hes) unless othe rwise specified. package designator tape section cavity number cavity status cover tape status l6x leader (start end) 125 (typ) empty sealed carrier 5000 filled sealed trailer (hub end) 75 (typ) empty sealed
?2006 fairchild semiconductor corporation 10 www.fairchildsemi.com fsa66 low-voltage uhs single s pst normally open analog switch fsa66 rev. 1.0.1 reel dimensions for micropack 6 dimensions are in millimeters (inc hes) unless otherwise specified. t a p e s i z eabcdn w 1 w 2 w 3 8 mm 7.0 (177.8) 0.059 (1.50) 0.512 (13.00) 0.795 (20.20) 2.165 (55.00) 0.331 + 0.059 / C0.000 (8.40 + 1.50 / ? 0.00) 0.567 (14.40) w1 + 0.078 / ? 0.039 (w1 + 2.00 / ? 1.00)
?2006 fairchild semiconductor corporation 11 www.fairchildsemi.com fsa66 low-voltage uhs single s pst normally open analog switch fsa66 rev. 1.0.1 physical dimensions dimensions are in inches (millimet ers) unless otherwise noted. 5-lead sot23, jedec mo-178, 1.6mm
?2006 fairchild semiconductor corporation 12 www.fairchildsemi.com fsa66 low-voltage uhs single s pst normally open analog switch fsa66 rev. 1.0.1 physical dimensions (continued) dimensions are inches (millimeters) unless otherwise noted. 5-lead sc70, eiaj sc-88a, 1.25mm wide
?2006 fairchild semiconductor corporation 13 www.fairchildsemi.com fsa66 low-voltage uhs single s pst normally open analog switch fsa66 rev. 1.0.1 physical dimensions dimensions are inches (millimet ers) unless otherwise noted. pb-free 6-lead micropak, 1.0mm wide .
?2006 fairchild semiconductor corporation 14 www.fairchildsemi.com fsa66 low-voltage uhs single s pst normally open analog switch fsa66 rev. 1.0.1
www. onsemi.com 1 on semiconductor and are trademarks of semiconductor components industries, llc dba on semiconductor or its subsidiaries i n the united states and/or other countries. on semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property . a listing of on semiconductors product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent ? marking.pdf . on semiconductor reserves the right to make changes without further notice to any products herein. on semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does on semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. buyer is responsible for its products and applications using on semiconductor products, including compliance with all laws, reg ulations and safety requirements or standards, regardless of any support or applications information provided by on semiconductor. typical parameters which may be provided in on semiconductor data sheets and/or specifications can and do vary in dif ferent applications and actual performance may vary over time. all operating parameters, including typic als must be validated for each customer application by customers technical experts. on semiconductor does not convey any license under its patent rights nor the right s of others. on semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any fda class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. should buyer purchase or use on semicondu ctor products for any such unintended or unauthorized application, buyer shall indemnify and hold on semiconductor and its officers, employees, subsidiaries, affiliates, and distrib utors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that on semiconductor was negligent regarding the design or manufacture of the part. on semiconductor is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5817 ? 1050 www.onsemi.com literature fulfillment : literature distribution center for on semiconductor 19521 e. 32nd pkwy, aurora, colorado 80011 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your localsales representative ? semiconductor components industries, llc

▲Up To Search▲

Price & Availability of FSA66M5X

	To Download FSA66M5X Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .